Under-Sink Water Saver/Heater
The Lycris Byrne Under-Sink Water Saver/Heater is designed to boost the hot water being fed from the hot water storage cylinder to the hot tap at the kitchen sink. The Under-sink Water Saver/Heater will give a limited amount of instant hot water at the kitchen sink thus saving on average 4.54 litres of water every time hot water is required in the kitchen. The water in the under-sink water saver/heater is heated by a 1.5 kilowatt electric immersion heater. This system eliminates the initial cold water run off from the hot water storage cylinder to the kitchen hot tap saving time, water and money.
| 1. Existing Hot Water Storage Cylinder 2. 3kW Immersion Heater 3. Hot Water Supply from Cylinder 4. Under Sink Water Saver/Heater |
5. 1.5kW Immersion Heater installed in Under-Sink Water Saver/Heater 6. On/Off Rocker Switch & Indicator Light 7. Hot Water Supply to Mixer Unit/Tap 8. Kitchen Sink 9. Cold Feed to Mixer Unit/Tap from Mains |
| Capacities available - 4 litre, 5 litre & 10 litre | |
- Instant Hot Water at the Kitchen Sink
- No wasting or waiting for hot water to appear
- Provides 5 litres of hot water ideal for dish washing etc
- Economy 1.5Kw heater with safety thermostat
- Complete with 1/2" (irish) pipe connectors, electric plug and 1.5 metres cable
- Separate mains-on switch and heating indicator lamp
- Heating recovery time of 4 minutes
- For use with hot water system only
Under-Sink Water Saver
Email this to a friend