Lycris-Byrne - Copper & Steel Cylinders

TECHNICAL DATA
These units are available as standard in the following sizes:-

(a) 50 gallon cold water storage & 30/35 gallon hot water storage
(b) 60 gallon cold water storage & 40/45 gallon hot water storage
(c) 70 gallon cold water storage & 55/60 gallon hot water storage

OUTSIDE DIMENSIONS OF UNIT (excluding pipework and including insulation):

(a) Diameter: 530mm - Height: 2100mm.
(b) Diameter: 600mm - Height: 2100mm.
(c) Diameter: 685mm - Height: 2100mm.

Other variations in sizes are available on request.

SPECIFICATIONS:-

Electrical: 220v/240v 50 Htz Single Phase.

Options: 3kW Side Entry Immersion Heater with energy cut-out safety feature.
Options: High Recovery Heating Coil.

Water Connection Sizes
1. Water Mains to Storage Tank:	½" B.S.P.
2. Separare Cold Water Feed to Cistern Storage Tank:	¾" B.S.P.
3. Pressurised Cold Water Supply from Cylinder (through pump):	¾" B.S.P.
4. Pressurised Hot water Supply from Cylinder (through pump):	¾" B.S.P.
5. Seperate Hot Water Supply from Cylinder (High Flow)	¾" B.S.P.
6. Indirect Heating Coil (x2):	1" B.S.P.
7. Drain Offs, one each on cold water tank & cylinder	½" B.S.P.

The entire unit, except cold water storage tank lid, is insulated.

Click here to email a link to this page to a friend or contact.